twn plasma torch parts

The contact-cut torch for the Plasma 18 & 31 uses a cutting electrode and nozzle combination to focus and direct the cutting jet. A safety cup (also called a ‘shroud’) is used to cover these consumable parts and as such does become worn over time and require replacing.

The contact-cut torch for the Plasma 18 & 31 (Trafimet S30/S45 torch) uses a cutting electrode and nozzle combination to focus and direct the cutting jet. A safety cup (also called a ‘shroud’) is used to cover these consumable parts and as such does become worn over time and require replacing.

The contact-cut torch for the Plasma 18 and 31 uses a cutting electrode and nozzle combination to focus and direct the cutting jet. A safety cup (also called a ‘shroud’) is used to cover these consumable parts and as such does become worn over time and require replacing.

The contact-cut torch for the Plasma 18 & 31 uses a cutting electrode and nozzle combination to focus and direct the cutting jet. A safety cup (also called a ‘shroud’) is used to cover these consumable parts and as such does become worn over time and require replacing.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.

Replacement plasma cutting torch for use with the Plasma 45HF. This torch uses high frequency and does not need to directly touch the workpiece. It is available with 6 metre cables only & has a Euro type quick-connector plug fitting. The trigger assembly is located on the top of the torch and the handle has a moulded grip.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.