hose fittings

Inserted into hose, to attach hose nuts. Available for a variety of hose bore sizes. Use with hose nuts and suitable hose clips to secure in place and seal.

Available to suit Oxygen, Argon, etc.. (RH) or Acetylene, Propane, etc.. (LH). Range includes 3/8 BSP (HD) & 1/4 BSP (LW) thread sizes.

Available to suit Oxygen, Argon, etc.. (RH) or Acetylene, Propane, etc.. (LH). Range includes 3/8 BSP (HD) & 1/4 BSP (LW) thread sizes.

Use with suitable hose clips to join 2 lengths of hose together without using threaded nuts and couplers. Splicers are available to suit a range of hose sizes.

An impact-resistant metal clamp, secured with a central screw, designed to hold 2 lengths of hose (up to 10mm dia) as a legal alternative to taping.

This converter enables you to connect a 4mm to 6mm hose typically used to connect a mini-MIG machine to a standard size argon hose (6mm internal bore). Also available in a complete set.

Available to suit Oxygen, Argon, etc.. (RH) or Acetylene, Propane, etc.. (LH). Range includes 3/8 BSP (HD) & 1/4 BSP (LW) thread sizes.

Available to suit Oxygen, Argon, etc.. (RH) or Acetylene, Propane, etc.. (LH). Range includes 3/8 BSP (HD) & 1/4 BSP (LW) thread sizes.

Quick connect fittings to allow rapid change between different gas welding/cutting torches from a single hose assembly. Male Coupling 3/8” RH Comply with BS EN 561:2002.

Quick connect fittings to allow rapid connection and disconnect of gas hose assembly to a pressure regulator. Use in conjunction with AU126001. Female Coupling 3/8” RH Comply with BS EN 561:2002.

Quick connect fittings to allow rapid change between different gas welding/cutting torches from a single hose assembly. Male Coupling 3/8” LH Comply with BS EN 561:2002.

Quick connect fittings to allow rapid connection and disconnect of gas hose assembly to a pressure regulator. Use in conjunction with AU126002. Female Coupling 3/8” LH Comply with BS EN 561:2002.

Sif Weld 200 MTS gas adaptor. Converts from M10 female to 3/8" BSP Male.