gas rods - brazing

Original multi-purpose Sifbronze low temperature rod for brazing and bronze welding of steels, cast iron , copper and its alloys. • Ideally suited for general mild steel work, galvanised steel and dissimilar metal applications. • Use SIFBRONZE flux.

A low-carbon mild steel rod ideal for all types of mild steel and wrought iron welding. • It is free-flowing and produces a high strength ductile weld • It is copper coated to ensure long shelf life • Particularly suitable for sheet metal panels, plates ,tubes and fittings.

Free flowing flux impregnated brazing rod, ideal for brazing clean mild steel.

The phosphor bronze rod contains 7% tin and is suitable for fusion welding of phosphor bronze castings and copper alloys (brass). It is also used for TIG brazing on ferrous and dissimilar metals.

This rod is Sifbronze No.1 with a full flux coating providing the added benefit of faster, continuous brazing through not having to flux-dip. • It is ideally suited for general mild steel work, galvanised steel and dissimilar metal applications.

A special brazing rod containing specific additions of Manganese and Tin, giving it free flowing characteristics. • It is particularly suitable for use with gas flux.

Self fluxing solder for use on Aluminium and its alloys. Separate instruction sheet available.

Super SG for full fusion welding with oxy/acetylene of Spheroidal Graphite cast iron, providing a machinable weld. • Available in 6mm and 10mm diameters.

Phosphor bronze rod with 12% Tin, for improved colour match on brass and bronze.

Copper/Phosphorus alloy with 5% silver, having ductility and capillary flow characteristics between 17-2 AG and 17-15 AG.

An easy flowing, high quality copper rod for full fusion welding of deoxidised copper sheet. • The finished weld is free from porosity and copper oxide inclusions • Suitable for fabrication and repairs to copper pipes, tanks etc.

A special alloy steel rod containing manganese for toughness. It provides a weld deposit of high strength and ductility. Recommended for oxy/acetylene welding of pipelines and pressure vessels.

Brazing rod containing 9% nickel, for use on cast iron, copper alloys, stainless and alloy steels. • It has excellent wearing properties and high strength making it ideal for tubular structures, brazing cutting tips and as a general maintenance alloy. • Use SIFBRONZE or SIF TOOL TIP/BRAZE STAINLESS flux.

This copper phosphorus alloy rod is self-fluxing on copper. Its good electrical conductivity and corrosion resistance make it ideal for copper tubing, switchgear, motors etc.

The rod is suitable for full fusion welding of cast iron, providing a high strength weld metal which is easily machinable. • It gives an excellent colour match • Has the same structure as grey cast iron • Use SIF CAST IRON flux.

A copper phosphorus alloy with the addition of 2% silver to improve ductility and flowing characteristics. • Highly resistant to corrosion and not subject to dezincification • It is ideal for hot water cylinders, electric motors and also general maintenance work.

This rod is Sifbronze No.2 with a full flux coating and with similar characteristics. The UTS is approximately 25% greater than Sifredicote No.1 and is ideal for high strength production and maintenance applications.

Copper/Phosphorus alloy with 15% silver for stressed applications. Ideal for poor fitting joints.