fume extraction accessories

Pack of 10 Pre-Filters for the Phantom Air PAPR Package.

Main Filter - P R SL standard, for the Phantom Air PAPR Package.

Metal hood to fit over the end of a fume extraction arm, diameter 150mm. incl. throttle valve.

Set connection material for arm diam. 150 mm for mobile units. The set consists of the following parts:1 x Bearing ring diam: 150 mm; 2 piece plastic; for suction arm, 1 x screw set for plastic bearing ring, 8 x screws with hexagon socket M6x35, 8 x washers M6, 8 x M6 hex nuts, 8 x M6 spring washer, 1 x Grease tube 3 g for bearing ring.

ACTIVATED CARBON FILTER FOR PROTECTOXTRACT. 484 x 484 x 20 mm.

The ProtectoSpark is a retro-fittable filter tray that enables the ProtectoXtract to be used for grinding, applications. The protectoSpark filters out hot metallic particles prior to the entry to the 5 stage filter system.

Gross Filter (PK 10) for ProtectoXtract. 490x490mm. G4 class filter.

MAIN FILTER FOR PROTECTOXTRACT. Particle filter F9.

Coupling sleeve for hose size 45mm. Hard version.

This nozzle offers slightly wider shielding gas coverage on medium-thickness materials in butt and fillet applications, and outside-corner joints.

Precoat for filter cartridges, 100g (Bucket). For precoating of filter cartridges 10 g of precoat powder are required per m² filter surface.

PREFILTER MATS (10 PCS) 610x610x20mm. Can be used in units such as ProtectoXtract Wall and ProtectoXtract Twin.

Replacement HEPA Filter for the ProtectoVac Fume Extractor.

Replacement Fine Filter for the ProtectoVac Fume Extractor.

Wall bracket with elbow and flange ring, clamp and screws. For fan/suction arm size 150MM.

Activated carbon filter, 305 x 305 x 100 mm. Activated carbon filter in replaceable housing. incl. 3.5 kg activated carbon.

Aluminium Spark Arrestor Filter for use with the Weldability ProtectoXtract.

Wall bracket with elbow and flange ring, clamp and screws. To fit 150mm suction arm.

Clamp ring 2mm, 2 parts for suction arm 150mm, including rubber ring.

Connecting kit for 160mm diameter fans to extraction arms including adapter, flange and hose clip.

Filter cartridge, filter area 10m². Size: 327 x 600 mm. Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket. Filter surface 10 m², separation degree BIA M. Precoat is available separately which will lengthen the life of the cartridge.

Brake-Disk for suction arm (middle-joint), (2 pieces, diam. 100mm).

Friction disc for a suction arm, third joint, set of 2 pieces, diameter 55mm.

Friction disc for a suction arm, 1 internal joint, set of 2 pieces, diameter 80mm.

Funnel Nozzle 45mm with magnetic base for ProtectoTwin Portable Fume Extractor.

LMD508 Filter unit 230v 1.2kw Motor 320m3/hr.

On-torch MIG extraction kit, 24.5mm diameter for use with the ProtectoVac Fume Extractor for on-MIG-torch extraction.

On-torch MIG extraction kit, 27.5mm diameter for use with the ProtectoVac Fume Extractor for on-MIG-torch extraction.

Size: 280 x 280 x 20 mm. 10 pieces per set. Filter class M5.

HANDYCART REPLACEMENT FILTER. Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket. With PTFE membrane, filter surface 0.8 m².

PROTECTOTWIN FILTER. Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket. With PTFE membrane, filter surface 1.2 m², dust category M.

The ProtectoXtracTop is a retro-fit-able filter unit that enables the ProtectoXtract to be used for grinding applications. Extraction of particles takes place through a perforated plate within the supporting surface. ATTENTION; This unit must only be used in combination with the ProtectoSpark (EXT978013). Working surface W x D = approx.. 1100 x 700 mm External dimensions: W x D = 1150 x 750 mm.

Replacement 2.5M hose for the ProtectoVac Fume Extractor.

Rubber band for suction arm, colour - black. Approx 6cm wide.

Slit Nozzle 45mm with magnetic base for ProtectoTwin Portable Fume Extractor.

Spare hose for flexible suction arm, 2m long. Also used for telescopic arm, diameter 150mm.

Spare hose for flexible suction arm, 3m long.

Spare hose for flexible suction arm, 4m long.

Fume extraction system wall bracket. Compatible with Fan 2 000 m³/h, 0,75 kW, Fan 2 500 m³/h, 1,1 kW, Fan 3 000 m³/h, 1,5 kW.

Washable Aluminium Filter for use with our Weldability ProtectoXtract Mobile Fume Extractor to be used in welding applications to prevent burning of the fabric filters.