cutting nozzles

Two-piece NM type cutting nozzles for use with ‘Apachi’ (’MAP’) gas in an NM style cutting torch or HD cutting attachment.

A range of nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

ANM are a range of nozzles used in the cutting of mild steel using the oxy/acetylene process. For use with NM cutters or HD cutting attachments.

2-piece propane cutting nozzles for use with Victor style cutting torches.

2-piece propane cutting nozzles for use with Victor style cutting torches.

2-piece propane cutting nozzles for use with Victor style cutting torches.

2-piece propane cutting nozzles for use with Victor style cutting torches.

Single-piece 2-seat oxygen acetylene cutting nozzles for use with Victor style cutting torches.

Single-piece 2-seat oxygen acetylene cutting nozzles for use with Victor style cutting torches.

Two-piece NM type cutting nozzles for use with ‘Apachi’ (’MAP’) gas in an NM style cutting torch or HD cutting attachment.

Single-piece 2-seat oxygen acetylene cutting nozzles for use with Victor style cutting torches.

2-piece propane cutting nozzles for use with Victor style cutting torches.

Two-piece NM type cutting nozzles for use with ‘Apachi’ (’MAP’) gas in an NM style cutting torch or HD cutting attachment.

A range of extended nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

A range of extended nozzles used in the cutting of mild steel using the oxy/acetylene process and HD (Type 3, 4 and 5) style torch equipment. An extended length nozzle measures 87mm in length, 11mm longer than the regular ANM, giving greater access to hard-to-reach areas.

A range of extended nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

AGNM nozzles gouge welds and plate using oxy/acetylene with the Heavy Duty cutting attachment or NM type cutter. 3 sizes are sold with a range of gouge widths.

ANM are a range of nozzles used in the cutting of mild steel using the oxy/acetylene process. For use with NM cutters or HD cutting attachments.

A range of extended nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

2-piece propane cutting nozzles for use with Victor style cutting torches.

A range of extended nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

A range of extended nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

A range of extended nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

AGNM nozzles remove welds and make gouges in mild steel plate using the oxy-acetylene process with a heavy duty cutting attachment or NM type cutter.

ANM are a range of nozzles used in the cutting of mild steel using the oxy/acetylene process. For use with NM cutters or HD cutting attachments.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

Like the AGNMs, PGNM nozzles are used with NM and HD cutters, but use oxy/propane to gouge.

A range of nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

AGNM nozzles remove welds and make gouges in mild steel plate using the oxy-acetylene process with a heavy duty cutting attachment or NM type cutter.

Like the AGNMs, PGNM nozzles are used with NM and HD cutters, but use oxy/propane to gouge.

A range of nozzles used in the cutting of mild steel using the oxygen/acetylene process and lightweight torch equipment. For use with a Lightweight cutting attachment.

Like the AGNMs, PGNM nozzles are used with NM and HD cutters, but use oxy/propane to gouge.

A range of nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

Like the AGNMs, PGNM nozzles are used with NM and HD cutters, but use oxy/propane to gouge.

A range of nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

A range of nozzles used in the cutting of mild steel using the oxygen/acetylene process and lightweight torch equipment. For use with a Lightweight cutting attachment.

ARCNM nozzles are used with the NM type cutters and HD cutting attachments for cutting rivet heads. One size available.

The ASNM and ASFN sheet metal cutting nozzles are made to cut sheet mild steel to a 3mm maximum thickness. ASNM is designed to be used with the HD style cutting attachment. ASFN is used with the small,LW style cutting attachment.

A selection of blanking nozzles for use in testing gas hand equipment for leaks. These nozzles have no outlet holes so they do not allow gases to pass through them, thus forcing them to exit via leaks in hoses etc. Available in ANM (HD) cutting nozzle style and LW and HD swaged welding nozzle style.

The ASNM and ASFN sheet metal cutting nozzles are made to cut sheet mild steel to a 3mm maximum thickness. ASNM is designed to be used with the HD style cutting attachment. ASFN is used with the small,LW style cutting attachment.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

VVC are used with machine cutters using propane to cut quickly and efficiently, with repeated accuracy. The popular ‘Chromed’ type is available in 16 sizes.

A range of nozzles used in the cutting of mild steel using the oxygen/acetylene process and lightweight torch equipment. For use with a Lightweight cutting attachment.

For use with a Lightweight cutting attachment. Available in 3 sizes to cut 3-6mm (1/8"-1/4"), 6-20mm (1/4"-3/4") & 20-50mm (3/4"-2").

Two-piece NM type cutting nozzles for use with ‘Apachi’ (’MAP’) gas in an NM style cutting torch or HD cutting attachment.

Two-piece NM type cutting nozzles for use with ‘Apachi’ (’MAP’) gas in an NM style cutting torch or HD cutting attachment.

Two-piece NM type cutting nozzles for use with ‘Apachi’ (’MAP’) gas in an NM style cutting torch or HD cutting attachment.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

NFF are 2-piece cutting nozzles that are used with propane or natural gas, in flat seat torches.

300mm - WC are used with machine cutters using propane to cut quickly and efficiently with repeated accuracy. The popular chromed type is available in 16 sizes.

VVC are used with machine cutters using propane to cut quickly and efficiently, with repeated accuracy. The popular ‘Chromed’ type is available in 16 sizes.

ANM are a range of nozzles used in the cutting of mild steel using the oxy/acetylene process. For use with NM cutters or HD cutting attachments.

A range of nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

A range of nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.

PNM & PNME oxygen/propane cutting nozzles. (E) = PNME extended length.

A range of extended nozzles used in the cutting of mild steel using the oxy/propane process and Type 3, 4 and 5 style torch equipment.