bzl mig liners

Torch liners are used to carry the wire up through the MIG torch from the reel to the contact tip & can become blocked by wire dust so should be changed accordingly.

The liner acts as a conduit to guide the welding wire through the welding torch to the contact tip. It is important to match the type and size of the liner to the type and size of the welding wire consumed.

The liner acts as a conduit to guide the welding wire through the welding torch to the contact tip. It is important to match the type and size of the liner to the type and size of the welding wire consumed.

The torch liners in mini MIG machines are of a simple design and carry wire from the feeder to the contact tip. Two diameters are available, both in 3m lengths, to suit the MIG and MAX models respectively.

The liner acts as a conduit to guide the welding wire through the welding torch to the contact tip. It is important to match the type and size of the liner to the type and size of the welding wire consumed.

The liner acts as a conduit to guide the welding wire through the welding torch to the contact tip. It is important to match the type and size of the liner to the type and size of the welding wire consumed.

Torch liners are used to carry the wire up through the MIG torch from the reel to the contact tip & can become blocked by wire dust so should be changed accordingly. In 10ft & 15ft versions.

The torch liners in mini MIG machines are of a simple design and carry wire from the feeder to the contact tip. • Two diameters are available, both in 3m lengths, to suit the MIG and MAX models respectively.

The torch liners in mini MIG machines are of a simple design and carry wire from the feeder to the contact tip. • Two diameters are available, both in 3m lengths, to suit the MIG and MAX models respectively.

Torch liners are used to carry the wire up through the MIG torch from the reel to the contact tip & can become blocked by wire dust so should be changed accordingly. In 10ft & 15ft versions.

Torch liners are used to carry the wire up through the MIG torch from the reel to the contact tip & can become blocked by wire dust so should be changed accordingly. In 10ft & 15ft versions.