siftrode electrodes

SIFTrode 6013-R is a versatile and general purpose rutile-coated mild steel MMA electrode which runs smoothly and leaves an attractive weld bead. SIFTrode 6013-R can be confidently used on land-based steel structures and general fabrication alike.

General purpose multi-positional rutilecoated mild steel electrode with stable arc and easy-lifting slag. 3.2mm diameter supplied in 5kg pack.

Basic coated low hydrogen electrode.3.2mm x 350mm in 5.0kg Packs. CE Certified to meet the requirements of EN1090.

General purpose, smooth running mild steel electrode. 4.0mm x 350mm in 5.0kg Pack. CE Certified to meet the requirements of EN1090.

A rutile coated electrode for welding molybdenum alloyed 18/12 and similar cr/Ni/Mo steels. High resistance against general and intergranular corrosion. Self-releasing slag and an excellent weld appearance. Diameter 2.5mm supplied in 4.0kg tin.

Basic coated, low hydrogen electrode with recovery about 120%, excellent welding characteristics. For welding construction steels and fine grained steels with increased yield strength. Desposit has very low hydrogen content, below 5ml/100g.

This model has a 200watt (approx) heater which is thermostatically controlled to warm the rods between 80°C and 130°C and improve their welding performance. An indicator light will show when heating is in operation.Capable of holding a full pack of 5kg electrodes. The carry handle will serve as a stand for the quiver to rest on. The quiver is easy to load, easy to carry and is ideal for on-site use. Weighs only 5kg with a height of 50cm, providing great storage and protection for all 350mm long .

Basic-coated low-hydrogen electrode with high efficiency and good mechanical properties. 2.5mm diameter x 350mm Length supplied in a 5.0kg pack.

A rutile coated high Cr/Ni electrode for welding of difficult-to-weld steels like armour plate, austenitic Mn steel, high carbon steel and Cr/Ni steels. Self-releasing slag and an excellent weld appearance. Diameter 2.5mm supplied in 4.0kg tin.

Hardfacing general purpose electrode providing 57 – 62 HRC hardness. Recommended for elements exposed on heavy impact and medium abrasion. The deposit can be ground and gouged.

Double coated rutile-basic universal electrode. Ideal for use in pipelines and steel construction. For joint penetrations and welding in difficult positions. Excellent welding properties, smooth and pure joints. 100% second ignition. Double coating results in stable, concentrated and direct arc.

A rutile coated 308L electrode for welding austentic stainless steel (304). Suitable for dairy and cold storage applications. Self-releasing slag and an excellent weld appearance. Diameter 3.2mm supplied in a 4.0kg tin.

A rutile coated electrode for welding corrosion resistant and heat resistant CrNi steels., joining dissimilar metals and buffering. Suitable for clad steels and ensures good cracking resistance.

A rutile coated electrode for welding molybdenum alloyed 18/12 and similar cr/Ni/Mo steels. High resistance against general and intergranular corrosion. Self-releasing slag and an excellent weld appearance. Diameter 2.5mm supplied in 1.0kg pack.

SIFTRODE 6013-R 3.2MM SAMPLE  CLEARANCE ITEM

SAMPLE PACK. Versatile, general purpose, rutile-coated, mild steel MMA electrode. Ideal for use on land-based steel structures and general fabrication alike. Runs smoothly, attractive weld bead, low spatter and easy-lifting slag. .

Cast iron electrode with NiFe bimetal core wire. Dedicated for cold welding grey, nodular and malleable cast iron and for joining cast iron with steel. Excellent welding properties, does not overheat, the speed of welding is high, almost no spatters, slag removes easily. Can be welded with AC Uo < 50V and DC (+) and (-).

A Rutile basic-coated electrode for joining dissimilar steels and difficult-to-weld steels. Recommended for buffer layers prior to surfacing. Excellent weld appearance and durability.

A rutile coated high Cr/Ni electrode for welding of difficult-to-weld steels like armour plate, austenitic Mn steel, high carbon steel and Cr/Ni steels. Self-releasing slag and an excellent weld appearance. Diameter 2.5mm supplied in 1.0kg pack.

SIFCHROME 312 3.2MM SAMPLE  CLEARANCE ITEM

SAMPLE PACK. Rutile coated austenitic stainless electrode for welding of difficult to weld steels like armour plate and high carbon steel. Self-releasing slag and an excellent weld appearance. The electrode of choice for dissimilar steel and stainless materials.

This is a 29.9 stainless TIG filler rod, suitable for difficult-to-weld steels (Mn steels, tool and spring steels), also dissimilar materials. High resistance to weld metal cracking.

An iron-powder rutile-coated electrode with about 150% efficiency. For butt & fillet welds on medium to thick plates in shipbuilding and structural steel.

Basic coated tin bronze electrode for repairing copper and copper tin bronzes, brasses and phosphor bronzes. Suitable for surfacing on brasses, wrought bronzes (CuSN), mild steel and cast steel.

Cast iron electrode with Ni pure core wire. Dedicated for cold welding grey and malleable cast iron and joining cast iron with steel. Welding is possible in all positions including vertical down.

Electrode for cutting and gouging, suitable for all types of steels, cast iron, copper and its alloys. Ventilation is necessary.

SIFTRODE SPEZIAL 3.2MM SAMPLE  CLEARANCE ITEM

SAMPLE PACK. Double Coated Rutile Basic Steel Electrode Low Hydrogen for steel construction. For root passes and positional welding. Excellent welding properties, smooth and pure joints. 100% second ignition. Stable, concentrated and direct arc. .

Professional Quality MMA Arc Welder, Digital Control, Switchable Lift Tig feature. Exceptional Welding performance of all types of Welding Electrodes including Cellulosic. This SifWeld ST180 PRO welding machine adopts the latest pulse width modulation (PWM) technology and insulated gate bipolar transistor (IGBT) inverter technology whilst being portable, small in size, light weight, and with low consumption. The machine has excellent performance in MMA and TIG mode. In MMA mode the following can.

Lightweight, durable and completely portable, easy to load, easy to carry, ready to provide low cost control of welding quality in the workshop or on site. This portable drying oven can help reduce operating costs by providing operators with fast access to electrodes at the point of application. Features a 400watt heater which is thermostatically controlled to warm the rods between 60°C and 300°C. Weighs only 8kg with a rod lifter which can hold up to 18kg electrodes. Operates from 110v Mains .

Our most industrial drying oven for the storage and heating of welding rods. The stationary drying oven has the capacity to hold up to 20 packs of 5kg electrodes. The heavy-duty construction includes a durable powder-coated steel exterior, radial formed perforated shelving aiding heat convection, reinforced door, latches and handle with pockets at the base of the oven for easy transport by forklift. Operating power of 4500 Watts. Max temperature of 400°C. Operates from a 415v 3 phase mains input.

A stable, low-spatter electrode with 2.25% Cr and 1.0% Mo for creep and heat-resistance (<600°C). Suited to pressure-vessel, power-plant and refinery applications.

A rutile coated 308L electrode for welding austentic stainless steel (304). Suitable for dairy and cold storage applications. Self-releasing slag and an excellent weld appearance. Diameter 3.2mm supplied in a 1.0kg pack.

A 316L grade low carbon stainless steel electrode suitable for use in applications where the mechanical requirements are tough. It provides good impact toughness at low temperatures and 100% recovery. Re-dry at 200ºc for 2 hours. Diameter 2.5mm supplied in 4.0kg tin.

316 stainless electrode for general work.

A vac-packed cellulosic electrode for pipe welding, performing well in all positions, especially vertical down.

SIFTrode 6013-R is a versatile and general purpose rutile-coated mild steel MMA electrode which runs smoothly and leaves an attractive weld bead. SIFTrode 6013-R can be confidently used on land-based steel structures and general fabrication alike.

Basic coated low hydrogen electrode with improved mechanical properties and 120% recovery. Supplied in 2kg VacPac. Supplied 6 packs per 12kg carton.

Electrode for rapidly joining cast aluminium alloys. Recommended for joining aluminium alloys such as broken gear parts or other casting parts. Ideal for classing or rebuilding parts. Very good weldability with good penetration and porosity free deposit. Unique self-lifting slag and improved coating to protect against moisture pick up.

Cast iron electrode with NiFe bimetal core wire. Dedicated for cold welding grey, nodular and malleable cast iron and for joining cast iron with steel. Excellent welding properties, does not overheat, the speed of welding is high, almost no spatters, slag removes easily. Can be welded with AC Uo < 50V and DC (+) and (-).