welding electrodes

• SIFTrode 6013-R is a versatile and general purpose rutile-coated mild steel MMA electrode which runs smoothly and leaves an attractive weld bead • SIFTrode 6013-R can be confidently used on land-based steel structures and general fabrication alike.

These products are used to hold, and transmit current through an electrode in MMA welding. • The handles of these electrode holders twist (and untwist) to grip (and release) the electrode. • Twist-Grip style - handle twists to grip & release the rod. • 5mm max jaw opening.

These products are used to hold, and transmit current through an electrode in MMA welding. The RED handles of these electrode holders twist (and untwist) to grip (and release) the electrode. Twist-Grip style - handle twists to grip & release the rod. 5mm max jaw opening. CE Approved.

Double coated rutile-basic universal electrode. • Ideal for use in pipelines and steel construction • For joint penetrations and welding in difficult positions • Excellent welding properties, smooth and pure joints • 100% second ignition • Double coating results in stable, concentrated and direct arc.

Basic coated, low hydrogen electrode with recovery about 120%, excellent welding characteristics. • For welding construction steels and fine grained steels with increased yield strength. • Desposit has very low hydrogen content, below 5ml/100g.

These products are used to hold, and transmit current through an electrode in MMA welding. The yellow handles of these electrode holders twist (and untwist) to grip (and release) the electrode. Twist-Grip style - handle twists to grip & release the rod. CE Approved.

This model has a 200watt (approx) heater which is thermostatically controlled to warm the rods between 80°C and 130°C and improve their welding performance. An indicator light will show when heating is in operation.Capable of holding a full pack of 5kg electrodes. The carry handle will serve as a stand for the quiver to rest on. The quiver is easy to load, easy to carry and is ideal for on-site use. Weighs only 5kg with a height of 50cm, providing great storage and protection for all 350mm long .

A rutile coated electrode for welding molybdenum alloyed 18/12 and similar cr/Ni/Mo steels. • High resistance against general and intergranular corrosion • Self-releasing slag and an excellent weld appearance • Diameter 3.2mm • Supplied in 4.0kg tin.

Simple, efficient rod holders with crocodile jaws. Models for 150A, 200A and 600.

A popular design electrode holder. 3 models are available for 200A, 400A & 600A maximum.

General purpose, smooth running mild steel electrode. • 1.6mm x 300mm in 2.5kg pack • CE Certified to meet the requirements of EN1090.

General purpose multi-positional rutilecoated mild steel electrode with stable arc and easy-lifting slag. • 4.0mm diameter x 450mm • Length supplied in 5kg pack.

Electrode for cutting and gouging. Suitable for all types of: • Steels • Cast iron • Copper and its alloys • Ventilation is necessary.

• Hardfacing general purpose electrode providing 57 – 62 HRC hardness • Recommended for elements exposed on heavy impact and medium abrasion • The deposit can be ground and gouged.

Electrode Insert for Cebora PROF 90/120/150 Compatible Plasma Torches.

• A rutile basic-coated electrode for joining dissimilar steels and difficult-to-weld steels • Recommended for buffer layers prior to surfacing • Excellent weld appearance and durability.

Simple, efficient rod holders with crocodile jaws. Models for 150A, 200A and 600.

• A rutile coated electrode for welding corrosion resistant and heat resistant CrNi steels, joining dissimilar metals and buffering • Suitable for clad steels and ensures good cracking resistance.

A rutile coated high Cr/Ni electrode for welding of difficult-to-weld steels like armour plate, austenitic Mn steel, high carbon steel and Cr/Ni steels. • Self-releasing slag and an excellent weld appearance • Diameter 2.5mm supplied in 4.0kg tin.

Parts for Hypertherm Plasma Cutting Torches.

• A rutile coated 308L electrode for welding authentic stainless steel (304) • Suitable for dairy and cold storage applications • Self-releasing slag and an excellent weld appearance • Diameter 2.5mm • Supplied in a 4.0kg tin.

The contact-cut torch for the Plasma 18 & 31 uses a cutting electrode and nozzle combination to focus and direct the cutting jet. A safety cup (also called a ‘shroud’) is used to cover these consumable parts and as such does become worn over time and require replacing.

A rutile coated 308L electrode for welding austentic stainless steel (304). Suitable for dairy and cold storage applications. Self-releasing slag and an excellent weld appearance. Diameter 3.2mm supplied in a 1.0kg pack.

A rutile coated high Cr/Ni electrode for welding of difficult-to-weld steels like armour plate, austenitic Mn steel, high carbon steel and Cr/Ni steels. Self-releasing slag and an excellent weld appearance. Diameter 2.5mm supplied in 1.0kg pack.

A 316L grade low carbon stainless steel electrode suitable for use in applications where the mechanical requirements are tough. • It provides good impact toughness at low temperatures and 100% recovery. • Re-dry at 200ºc for 2 hours. • Diameter 2.5mm • Supplied in 4.0kg tin.

SIFTrode 6013-R is a versatile and general purpose rutile-coated mild steel MMA electrode which runs smoothly and leaves an attractive weld bead. • SIFTrode 6013-R can be confidently used on land-based steel structures and general fabrication alike.

Basic coated low hydrogen electrode with improved mechanical properties and 120% recovery. • Supplied in 2kg VacPac • Supplied 6 packs per 12kg carton.

SIFTRODE 7024 ELECTRODES  CLEARANCE ITEM

An iron-powder rutile-coated electrode with about 150% efficiency. • For butt & fillet welds on medium to thick plates in shipbuilding and structural steel.

Cast iron electrode with NiFe bimetal core wire. • Dedicated for cold welding grey, nodular and malleable cast iron and for joining cast iron with steel • Excellent welding properties • Does not overheat • The speed of welding is high • Almost no spatters • Slag removes easily • Can be welded with AC Uo < 50V and DC (+) and (-).

WELDABILITY CAST NI99  CLEARANCE ITEM

A nickel-cored electrode for welding grey cast iron and for joining cast irons to other ferrous or non-ferrous metals. Leaves an easily-machineable heat-affected zone.

Simple, efficient rod holders with crocodile jaws. Models for 150A, 200A and 600.

Two types of replacement curved spot welding electrodes for use in the arms used with the Spotter 9000, Spot 20/TI, Digital Spot 230 and Digital Spot 400 machines. Both of these electrodes have a 12mm diameter and are compatible with both our range of machines and a number of other leading brand models. A 90 angled version and a bent version are both available.

Parts for Hypertherm Plasma Cutting Torches.

This is an Electrode HF part for a MAX 1650 Plasma Torch.

Electrode for Trafimet A80 Compatible Plasma Torches.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.

Standard & long nozzles and electrodes are available for the Plasma 45 HF. The 45HF also uses a safety cup and a spacer to maintain an optimum distance from the workpiece and ensure clean, accurate cutting.

Electrode for Binzel PSB 60/80/121 Compatible Plasma Torches.

Electrode for Binzel PSB30 Compatible Plasma Torches. Available in a variety of different sizes.

Electrode for Binzel PSB31 Compatible Plasma Torches.

Electrode for Trafimet A80 Compatible Plasma Torches.

HILCO RED EXTRA  CLEARANCE ITEM

Universal electrode for welding in all positions, including vertical downwards. • Especially suitable for construction work where the use of one single type of electrode is permissible • Very attractive weld appearance • Suitable for both AC and DC current and will operate with low OCV, min 42V.

Electrode for Trafimet S54 Compatible Plasma Torches.

Parts for Hypertherm Plasma Cutting Torches.

This is a spare long electrode hafnium for a MAX 42 Plasma Torch.

Electrode Insert for Cebora PROF 52/70 Compatible Plasma Torches. Also referred to as C1368(extended electrode).

Electrode for Trafimet A80 Compatible Plasma Torches.

A versatile holder that can hold the rod at 180 º or 90 º angles.

Optimus is high quality electrode holder that is popular around the world for its durability, powerful grip and multi-position head, which makes it ideal for overhead welding. • EN60974-11.

Optimus is high quality electrode holder that is popular around the world for its durability, powerful grip and multi-position head, which makes it ideal for overhead welding. • EN60974-11.

Two types of 19mm diameter electrodes for use with the pedestal arms on the PTE 18, PTE 28, PCP 18 and PCP 28 spot welders. The straight electrode has a height of 45mm and the curved electrode has a height of 75mm. The curved electrode, which has a 6mm step, can be used in applications where access over a lip or edge is needed to spot weld.

Progress is a superior-quality twist-grip "stub" style electrode holder with class A electrical safety (400) and a precision-engineered jaw mechanism for the widest range of electrode diameters. Progress features a strong tool-steel jaw lever and a high-alloy brass body, with a glass fibre reinforced polyester handle and head for increased durability and drop resistance.

Progress is a superior-quality twist-grip "stub" style electrode holder with class A electrical safety (400) and a precision-engineered jaw mechanism for the widest range of electrode diameters. Progress features a strong tool-steel jaw lever and a high-alloy brass body, with a glass fibre reinforced polyester handle and head for increased durability and drop resistance.

These products are used to hold, and transmit current through an electrode in MMA welding. The RED handles of these electrode holders twist (and untwist) to grip (and release) the electrode. Twist-Grip style - handle twists to grip & release the rod. 5mm max jaw opening. CE Approved.

Two types of replacement curved spot welding electrodes for use in the arms used with the Spotter 9000, Spot 20/TI, Digital Spot 230 and Digital Spot 400 machines. Both of these electrodes have a 12mm diameter and are compatible with both our range of machines and a number of other leading brand models. A 90 angled version and a bent version are both available.