welding brazing rods

A low-carbon mild steel rod ideal for all types of mild steel and wrought iron welding. It is free-flowing and produces a high strength ductile weld. It is copper coated to ensure long shelf life. Particularly suitable for sheet metal panels, plates ,tubes and fittings.

The rod is suitable for full fusion welding of cast iron, providing a high strength weld metal which is easily machinable. It gives an excellent colour match and has the same structure as grey cast iron. Use SIF CAST IRON flux.

Original multi-purpose Sifbronze low temperature rod for brazing and bronze welding of steels, cast iron , copper and its alloys. Ideally suited for general mild steel work, galvanised steel and dissimilar metal applications. Use SIFBRONZE flux.

Free flowing flux impregnated brazing rod, ideal for brazing clean mild steel.

A copper rod, containing 3% silicon and 1% manganese used for fusion welding materials of similar composition, copper alloys (brass) and for TIG brazing steels. It is also suitable for surfacing steel and dissimilar metal applications.

A special brazing rod containing specific additions of Manganese and Tin, giving it free flowing characteristics. It is particularly suitable for use with gas flux.

The phosphor bronze rod contains 7% tin and is suitable for fusion welding of phosphor bronze castings and copper alloys (brass). It is also used for TIG brazing on ferrous and dissimilar metals.

This rod is Sifbronze No.1 with a full flux coating providing the added benefit of faster, continuous brazing through not having to flux-dip. It is ideally suited for general mild steel work, galvanised steel and dissimilar metal applications.

Phosphor bronze rod with 12% Tin, for improved colour match on brass and bronze.

Self fluxing solder for use on Aluminium and its alloys. Separate instruction sheet available.

A special alloy steel rod containing manganese for toughness. It provides a weld deposit of high strength and ductility. Recommended for oxy/acetylene welding of pipelines and pressure vessels.

This is a 90/10 aluminium bronze rod suitable for welding materials of a similar composition. It is used for surfacing and dissimilar metal joints, also TIG brazing on ferrous and dissimilar metals.

This copper phosphorus alloy rod is self-fluxing on copper. Its good electrical conductivity and corrosion resistance make it ideal for copper tubing, switchgear, motors etc.

The phosphor bronze rod contains 7% tin and is suitable for fusion welding of phosphor bronze castings and copper alloys (brass). It is also used for TIG brazing on ferrous and dissimilar metals.

An easy flowing, high quality copper rod for full fusion welding of deoxidised copper sheet. The finished weld is free from porosity and copper oxide inclusions. Suitable for fabrication and repairs to copper pipes, tanks etc.

High quality rod containing a minimum of 98.5% copper with deoxidizing elements. It is ideal for TIG welding of copper.

This rod is suitable for full fusion oxy-acetylene welding of Spheroidal Graphite cast iron, providing a machinable weld. Use SIF CAST IRON flux.

SIF FLUXCORE ALUMINIUM 4043  CLEARANCE ITEM

Flux cored 5% Silicon Aluminium rod: ideal for oxy/acetylene general repair work.

Heat Block is an insulation compound with unique heat-absorbing properties which insulates against heat transfer, preventing distortion to light gauge metals and protecting rubber and plastic components and painted or finished surfaces during soldering, brazing or welding. • It is easily removed by wiping with wet rags or running water. • Form on or around the surface of metal. • Non-toxic paste.