sif products | tig rods - stainless steel

A molybdenum bearing, stainless steel filler rod with low carbon content. It is corrosion resistant for welding molybdenum bearing austenitic stainless steels.

Stainless steel filler rod suitable for welding 18/8 (304) austenitic stainless steels, providing good corrosion and wear resistance.

This is a 29.9 stainless TIG filler rod, suitable for difficult-to-weld steels (Mn steels, tool and spring steels), also dissimilar materials. High resistance to weld metal cracking.

Stainless steel filler rod suitable for welding 18/8 (304) austenitic stainless steels, providing good corrosion and wear resistance.

A solid corrosion-resistant, chromium-nickel rod for TIG welding heat-resistant austenitic steels with high 25% Cr / 20% Ni contents. Offers good general oxidation resistance - especially at high temperatures - and is therefore common in industrial furnaces and heat exchangers. Fully austenitic therefore sensitive to hot cracking.

This stainless rod contains higher chromium and nickel. It can be used for joining material of similar composition and also dissimilar stainless steels.

Stainless steel filler rod, niobium stabilised to prevent weld decay, giving excellent corrosion resistance. Suitable for use on 18/8 type stainless steel, Nb and Ti stabilised, such as 304, 321 and where the weld is subjected to temperatures above 400oC.

A 2209 duplex rod for welding austenitic-ferritic stainless alloys where a high resistance to general corrosion, intergranular corrosion, pitting and stress corrosion is required. Increasingly popular in sour pipeline and offshore work.

This 309LSI stainless rod contains higher chromium and nickel. It can be used for joining material of similar composition and also dissimilar stainless steels.

A 2594 duplex rod for welding austenitic-ferritic stainless alloys where a high resistance to general corrosion, intergranular corrosion, pitting and stress corrosion is required. Increasingly popular in sour pipeline and offshore work.