oxy/fuel weld / cut | regulators - lx

This single-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Single chamber gas control • Fits cylinders with vertical outlet valves • Two gauges display- Bottle contents and output pressure • Pressure controlled by the centre dial • Maximum outlet pressure 10 Bar • Right hand thread.

This single-stage one-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Single chamber gas control • Fits cylinders with vertical outlet valves • One gauges display- Bottle contents and output pressure • Pressure controlled by the centre dial • Maximum outlet pressure 3.5 Bar • Maximum inlet pressure 20 Bar • Left hand thread • BS EN ISO .

Our economy handtight inflator is durable, easy to install and easy to use. Handtight cylinder connection requires no wrench for installation. Safe, easy operation by rubber tilt valve, which is simple to replace if it gets damaged due to excessive wear and tear. Horizontal one-piece model with all brass piston construction.

This single-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • 2 Gauges • Displays - Bottle contents & Output pressure • Output pressure controlled by the centre dial • Fits vertical outlets valves • Maximum outlet pressure 1.5 BAR.

This two-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • 2 Gauges • Extended side entry valve • Displays - Bottle contents & Output pressure • Output pressure controlled by the dial • Fits vertical outlets valves • Maximum outlet pressure 1.5 BAR • Inlet pressure 20 BAR • BS EN ISO 2503:2009.

These single-stage indicator regulators are designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting & Welding. • Features no gauges, making them ideal for site work, • System is pressurised by an indicator, positioned at the top of the regulator body.

This two-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Double chamber gas control • Fits cylinders with vertical outlet valves • Two gauges display- Bottle contents and output pressure • Pressure controlled by the centre dial • Maximum outlet pressure 10 Bar • Right hand thread • BS EN ISO 2503:2009.

This two-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Double chamber gas control • Fits cylinders with vertical outlet valves • Two gauges display- Bottle contents and output pressure • Pressure controlled by the centre dial • Maximum outlet pressure 3.5 Bar • Maximum inlet pressure 20 Bar • Left hand thread.

These single-stage plugged regulators are designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting & Welding or Oxy/Propane Cutting. • Ideal for site work • Fits cylinders with vertical outlets valves • Features no gauges • Output pressure is controlled by the dial • Maximum Outlet Pressure 7.0 Bar.

This single-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • 2 Gauges • Displays - Bottle contents & Output pressure • Output pressure controlled by the dial • Fits vertical outlets valves • Maximum outlet pressure 10 BAR.

This single-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • 2 Gauges • Displays - Bottle contents & Output pressure • Output pressure controlled by the dial • Fits vertical outlets valves • Maximum outlet pressure 1.5 BAR.

This two-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • 2 Gauges • Extended side entry valve • Displays - Bottle contents & Output pressure • Output pressure controlled by the dial • Fits vertical outlets valves • Maximum outlet pressure 10 BAR.

This two-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • 2 Gauges • Extended side entry valve • Displays - Bottle contents & Output pressure • Output pressure controlled by the dial • Fits vertical outlets valves • Maximum outlet pressure 10 BAR • BS EN ISO 2503:2009.

This two-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Double chamber gas control • Fits cylinders with vertical outlet valves • Two gauges display- Bottle contents and output pressure • Pressure controlled by the dial • Maximum outlet pressure 3.5 Bar • Maximum inlet pressure 20 Bar • Right hand thread.

This single-stage plugged regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting & Welding or Oxy/Propane Cutting. • Fits cylinders with vertical outlet valves • Maximum outlet pressure 10 Bar • Maximum inlet pressure 300 Bar • Right hand thread.

This single-stage one-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Single chamber gas control • Fits cylinders with vertical outlet valves • One gauges display- Bottle contents and output pressure • Pressure controlled by the centre dial • Maximum outlet pressure 10 Bar • Maximum inlet pressure 300 Bar • Right hand thread • BS EN ISO.

This single-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Single chamber gas control • Fits cylinders with vertical outlet valves • Two gauges display • Bottle contents and output pressure • Pressure controlled by the centre dial • Maximum outlet pressure 3.5 Bar • Right hand thread.

These single-stage plugged regulators are designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting & Welding or Oxy/Propane Cutting. • Ideal for site work • Fits cylinders with vertical outlets valves • Features no gauges • Output pressure is controlled by the dial • Maximum Outlet Pressure 1.5 Bar.

This single-stage plugged regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting & Welding or Oxy/Propane Cutting. • Single chamber gas control • Fits cylinders with vertical outlet valves • Maximum outlet pressure 3.5 Bar • Maximum inlet pressure 20 Bar • Left hand thread.

These single-stage indicator regulators are designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting & Welding. • Features no gauges, making them ideal for site work, • System is pressurised by an indicator, positioned at the top of the regulator body.

These single-stage plugged regulators are designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting & Welding or Oxy/Propane Cutting. • Ideal for site work • Fits cylinders with vertical outlets valves • Features no gauges • Output pressure is controlled by the centre dial • Maximum Inlet Pressure 20 Bar • Maximum Outlet Pressure 3.5 Bar.