clearance | oxy/fuel weld / cut

1S 2G PROPANE REGULATOR  CLEARANCE ITEM

Please contact us for details about this product.

CUP SPARKLIGHTER  CLEARANCE ITEM

Replacement flints to suit cup sparklighter available in a pk 5.

1S 2G OXYGEN REGULATOR  CLEARANCE ITEM

Gauges show output pressure and bottle contents. Oxy has 300 bar service, acety. has 20 bar.

This two-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Double chamber gas control • Fits cylinders with vertical outlet valves • Two gauges display- Bottle contents and output pressure • Pressure controlled by the dial • Maximum outlet pressure 3.5 Bar • Maximum inlet pressure 20 Bar • Right hand thread.

1 EAR O CLIP  CLEARANCE ITEM

Please contact us for details about this product.

1S 2G NITROGEN REGULATOR  CLEARANCE ITEM

Nitrogen Reg Short Stem -2.5inch. Side entry. 10 BAR output. 3/8”BSP RH outlets and 5/8”BSP RH inlet fittings. .

3IN MS NOZZLE   CLEARANCE ITEM

Please contact us for details about this product.

6MM 1.5MTR 1/4 FITTED HOSE  CLEARANCE ITEM

Fitted oxygen, acetylene and propane hose. High-Compression crimp fittings and Check Valves. Available in a range of lengths & bores with 3/8" BSP or 1/4" BSP fittings. B=oxy, R=acet, P=propane.

6MM RED HOSE (PER MTR)  CLEARANCE ITEM

EPDM hose to EN559 on 50mtr coils. B=oxy, R=acet, PRP=prop.

6MM TWIN HOSE (PER MTR)  CLEARANCE ITEM

Siamese oxy/acetylene. Hoses, moulded together.

8MM BLUE HOSE (PER MTR)  CLEARANCE ITEM

EPDM hose to EN559 on 50mtr coils. B=oxy, R=acet, PRP=prop.

HEATING TORCH SPARES  CLEARANCE ITEM

Please contact us for details about this product.

L/W CUTTING ATTACHMENT  CLEARANCE ITEM

Please contact us for details about this product.

L/W SHANK  CLEARANCE ITEM

HD PROPANE MIXER  CLEARANCE ITEM

ALT UK TYPE 2/3 PROPANE MIXER.

BLACK AIR HOSE  CLEARANCE ITEM

High quality, durable, unfitted black air hose. Supplied in a 3 metre length. ID=8.5mm, OD=12mm.

INDICATOR REG ACETYLENE  CLEARANCE ITEM

Bottle contents status shown by indicator on top. Ideal on-site. Pressure is determined via markings around knob. Oxy has 300 bar service, acetylene 20 bar.

PLUGGED REG ACETYLENE  CLEARANCE ITEM

No gauges - ideal for site work. Pressure is determined via the markings around the adjustment knob. Oxygen regulator has a 300 bar service, the acetylene and propane both have 20 bar service.

CIRCLE CUTTING GUIDE  CLEARANCE ITEM

Designed for model BCG30I110 and BCG30I230, our original line cutter. For newer models please use BCGCIRCLE31. This is a circle cutting guide for a straight line cutting machine. The attachment is just screwed in to the hole on the side of the machine, which then tethers it to a radius that is set from where you place the central pivot along the bar.

SIF FLUXCORE ALUMINIUM 4043  CLEARANCE ITEM

Flux cored 5% Silicon Aluminium rod: ideal for oxy/acetylene general repair work.

HEATING NOZZLE  CLEARANCE ITEM

Please contact us for details about this product.

HOSE CHECK VALVE  CLEARANCE ITEM

A vital item of gas safety equipment. This product must be used at the torch end of a hose to help prevent dangerous back-feeding of gases. Fasten inside the hose using hose clips.

HOSE CLIP  CLEARANCE ITEM

Please contact us for details about this product.

MS HEADNUT   CLEARANCE ITEM

Please contact us for details about this product.

NM TYPE CONNECTOR  CLEARANCE ITEM

small connector for BFNMSHA.

HD OXY CUTT/ATT VALVE  CLEARANCE ITEM

Please contact us for details about this product.

LW OXY CUTT/ATT VALVE  CLEARANCE ITEM

Please contact us for details about this product.

LW OXY SHANK VALVE   CLEARANCE ITEM

Please contact us for details about this product.

PHT NOZZLE  CLEARANCE ITEM

Please contact us for details about this product.

PNMR CUTTING NOZZLE  CLEARANCE ITEM

Please contact us for details about this product.

SIF NO 38 SILVER SOLDER  CLEARANCE ITEM

Suitable for all ferrous and non-ferrous metals except aluminium. It can be used with a range of heat sources. This alloy contains cadmium and care should be taken when using this rod. Use with SIF SILVER SOLDER flux.

SIFREDICOTE HANDY PACK  CLEARANCE ITEM

Please contact us for details about this product.

SINGLE SPADE GUIDE  CLEARANCE ITEM

Please contact us for details about this product.

STABILIZER ATT  CLEARANCE ITEM

Please contact us for details about this product.

SUCTION PIVOT  CLEARANCE ITEM

Please contact us for details about this product.

A range of 8 of the most popular size VVC machine cutting nozzles are also available in the economy ‘Non-Chromed’ style.

VVC TYPE CUTTING NOZZLE  CLEARANCE ITEM

A range of 8 of the most popular size VVC machine cutting nozzles are also available in the economy ‘Non-Chromed’ style.