RT2500 TIG/MMA INVERTER

The RT2500 offers high quality and reliable MMA/TIG welding characteristics for the professional repair and maintenance welder. This unit delivers a 250-A output and provides excellent performance with all electrode types. It also provides digital current display, pre-gas, slope up, slope down and post-gas timing. You may select either 2T or 4T torch switch operation. The unit also has an extremely good duty cycle even in high ambient temperatures and is fabricated in NewArc’s usual robust ex.

MF33 STANDARD PANEL MIG

Two knob control for voltage and wire speed, burn back and latching control. Suitable for use with WFU12-4C wire feed unit.

MF37 FRONT PANEL

Two knob control with digital display, burn back control, creep start, torch latching, wire inch, gas test, post gas and crater fill. Suitable for use with WFU12-4C wire feed unit.

MIG500 INVERTER POWER SOURCE

MIG500 Inverter Power Source three phase MIG inverter package provides superb MIG/MAG performance with all types of welding wires. This user friendly package offers high quality and reliable welding characteristics for the professional welder. The Newarc 500A package is designed for basic MIG/MAG welding in the medium to heavy fabrication industries. Thanks to its stepless control and ease of set up, the parameters can be fine tuned offering quality welds.

R1500 DV MMA INVERTER

The R1500 provides fast response and current regulation for high-quality and reliable welding characteristics. This portable and versatile unit is available in single or dual-voltage versions, and is a user-friendly machine enabling superb MMA performance with all electrode types. The R1500 has an excellent duty cycle even in high ambient temperatures, and is designed to meet environmental conditions across all production, site and maintenance applications. Features 110/230/Dual Voltage.

R4000 5000 TROLLEY

Our selection of lightweight transportation trolleys with easy-glide wheels for excellent manoeuvrability and stability. These are designed to accommodate the entire range of NewArc inverter-based power sources, wire feed units and water circulators.

R4000 CC INVERTER POWER SOURCE

The R4000 and R5000 series of advanced inverter power sources are versatile, lightweight and portable. The CC units are designed for superior MMA and TIG welding with an external control unit( T300 HF unit ). Housed in robust casings, these units are extremely reliable in the most challenging conditions. Newarc’s latest inverter design provides a more stable and precise arc characteristic than conventional machines and ensures high quality welding performance for any application. With high.

R4000 CC/CV INVERTER MK5

The R4000 and R5000 series of advanced inverter power sources are versatile,lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. The NewArc latest inverter design provides a more stable and precise arc characteristic than conventional machines and ensures high quality welding performance for any application. With high efficiency and power, these units also save energy and costs. Powerful 400-A and 500-A output, Extreme.

R5000 CC INVERTER

The R4000 and R5000 series of advanced inverter power sources are versatile, lightweight and portable. The CC units are designed for superior MMA and TIG welding with an external control unit T300 HF unit . Housed in robust casings, these units are extremely reliable in the most challenging conditions. Newarcs latest inverter design provides a more stable and precise arc characteristic than conventional machines and ensures high quality welding performance for any application. With high efficien.

R5000 CC/CV INVERTER MK5

The R4000 and R5000 series of advanced inverter power sources are versatile,lightweight and portable. Housed in robust casings, these units are extremely reliable in the most challenging conditions. The NewArc latest inverter design provides a more stable and precise arc characteristic than conventional machines and ensures high quality welding performance for any application. With high efficiency and power, these units also save energy and costs. Powerful 400-A and 500-A output, Extremely high .

R7000 CC MMA GOUGING INVERTER

R7000 CC MMA / Arc Air Gouging Inverter has been specifically designed for MMA and Arc-Air gouging. The unit delivers an impressive 700 amps of welding output current at 60% duty cycle making it suitable for use in any working environment. This high performance unit is also versatile enough to offer the fine control needed for intricate piping, tank and pressure vessel work.

RC300 REMOTE CONTROL BOX

RC300 Remote Control Box gives the operator more convenient control of welding current at the point of weld. Connection is automatically detected by the power source.

REMOTE CONTROL PULSE UNIT

Remote Control Pulse Unit. Connection to the remote control socket enables long pulse TIG welding.

RT2000 DV TIG INVERTER

With a fast response and current regulation, the RT2000 offers high quality and reliability for the professional welder. The user-friendly machine is portable, versatile and available in single and dual-voltage versions. It provides superb MMA performance with all types of electrodes, and TIG welding with high frequency ignition. The RT2000 provides digital current display, pre-gas, slope up, slope down and post-gas timing. You may select either HF or contact ignition and 2T or 4T torch sw.

RT4000 TIG INVERTER POWER SOURCE

These 400 and 500 amp DC inverter power sources provide professional and quality TIG and MMA welding. These units offer energy and cost saving solutions due to their high efficiency and power factor. The cooling on demand system further minimizes power consumption on standby and dust ingress. These lightweight and portable power sources are excellent performers. Main Features: • TIG and MMA DC Welding, • Gas time adjustment, • Variable current slope, • 2T or 4T torch switch operation, .

RT5000 TIG INVERTER POWER SOURCE

These 400 and 500 amp DC inverter power sources provide professional and quality TIG and MMA welding. These units offer energy and cost saving solutions due to their high efficiency and power factor. The cooling on demand system further minimizes power consumption on standby and dust ingress. These lightweight and portable power sources are excellent performers. Main Features: • TIG and MMA DC Welding, • Gas time adjustment, • Variable current slope, • 2T or 4T torch switch operation, .

T300 DC ARC INITIATION UNIT

The TIG300 High Frequency Control Unit is one of the most compact TIG units available. Connect to any Newarc constant current (cc) or multi-process (cccv) machine to gain TIG facility. Main Features: • Provides gas pre and post purge control. • High frequency striking. • Remote current control. • Digital read out. • Up and down slope. • Torch switch latching. • May be used in excess of 100 metres from the power source. • Additional sockets are provided at the rear for MMA use.

VIPER 2500S HF TIG UNIT

The Viper 2500S is a unique, compact TIG control unit that independently controls the welding current of any DC power source without the need for auxiliary or control cables. It operates from the open circuit voltage of any DC power source with an output of 40-100 V (petrol or diesel generators, rectifiers, inverters, etc.), can be used with one or two-piece torches, and provides excellent MMA and TIG welding characteristics. The Viper 2500S is a versatile and lightweight machine with vari.

VIPER2000 HF TIG UNIT

Viper2000 HF TIG Unit is one of the smallest and lightest high frequency DC TIG control units available. This versatile unit operates from the open circuit voltage of any DC constant current power source or generator. It is also extremely easy to use and is powered directly from the power source without the need for any auxiliary supply cables.The sturdy and practical design of this exceptionally portable unit makes it suitable for use in any working environment.

WFU12A-ILS FEEDER

4 roll drive wire feed units for Newarc CV inverters. The New-Arc WFU12A-RV wire feeders have been designed with increased environmental protection. They are built into a strong, durable plastic case using Zinc coated chassis components to give both great strength and protection when used in damp conditions. The wire feed unit is designed to work in conjunction with the Newarc range of CV inverter based power sources.

WFU12A-RV PELI CASE WFU

WFU12A-RV Peli Case Wire Feed Units have been designed with increased environmental protection. They are built into a strong, durable plastic case using Zinc coated chassis components to give both great strength and protection when used in damp conditions. Available with a choice of MF33 and MF37 panels that are sold separately.

WIRE FEEDER UNIT BODY WFU12-4C

The WFU12-4C wire feeder unit is designed to work in conjunction with the Newarc range of inverter based power sources. This powerful four roll drive wire feed system boasts electronic stabilisation for precise wire speed control. Available with a choice of MF33 and MF37 panels that are sold separately.

NEWARC MIG 400 POWER SOURCE

MIG 400 power Source three phase MIG inverter package provides superb MIG/MAG performance with all types of welding wires. This user friendly package offers high quality and reliable welding characteristics for the professional welder.