mig welding | mig wire - mild steel

A18/SG2 copper coated mild steel MIG wire for welding mild and medium tensile steels, for impact toughness down to -20C. 0.6mm diameter on a 15kg spool. CE Certified to meet the requirements of EN1090. Standard: EN ISO 14341-A - G 42 2 C1 /M21 3Si1.

Our SG2-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, autobody and repair & maintenance applications.

SG3/G4Si1 copper coated mild steel MIG wire with increased silicon and manganese for improved UTS. 0.8mm diameter on a 15kg spool. CE Certified to meet EN1090 requirements. Standard: EN ISO 14341-A - G 42 2 C1 / 46 5 M21 4Si1.

These MIG wire cleaning pads are engineered to clean and lubricate the wire as it passes through the wire-feeder. The black pad cleans and lubricates mild steels only. Rusted or shop-floor contaminated wires, or wires that exhibit poor cast or helix, lose up to 60% of their drag. The system cleans and lubricates wire, improving wire feed and lengthening tip and liner life. This cleaning and lubrication also has the benefit of reducing burn-backs and arcing that usually results from liner and ti.

A copper coated, alloy steel wire containing 1.0% chromium and 0.5%molybdenum. It is ideal for low alloy and creep resistant steels.

SIFMIG ZERO SG3 COPPER-FREE  CLEARANCE ITEM

Double-deoxidised mild steel MIG wire, free from copper coating with increased silicon and manganese content for welding unalloyed and low-alloyed mild and medium tensile steels requiring good impact toughness down to -20°C. Manufactured with a high-quality uncoppered finish for improved feeding and conductivity, SIFMIG ZERO SG3 typically provides a higher ultimate tensile strength over standard SIFMIG SG2 and the absence of copper on the wire surface results in a cleaner deposit and avoids the .

Double-deoxidised mild steel MIG wire, free from copper coating with increased silicon and manganese content for welding general, unalloyed and low-alloyed mild and medium tensile steels. Manufactured with a high-quality uncoppered finish for improved feeding and conductivity. The absence of copper on the wire surface results in a cleaner deposit and avoids the metallurgical risks of increased copper in the weld pool. 250kg Drum.

Copper coated mild steel MIG wire for welding mild and medium tensile steels, for impact toughness down to -20C. Standard: EN ISO 14341-A - G 42 2 C1 /M21 3Si1.