clearance | mig welding

BND CONTACT TIP  CLEARANCE ITEM

Genuine Bernard elliptical contact tips for use with the EZ-200A, EZ-300A and EZ- 400A MIG torches. Available in a range of sizes from 0.8mm to 2.0mm. In short length for use with the short style head assemblies (QBD4335 and QBD4635).

GAS TEST FLOWMETER  CLEARANCE ITEM

Used to measure the flow of shielding gas at the torch. • Suitable for application with a flow of up to 15 lpm.

MIG 130T MACHINE 230V 1ph  CLEARANCE ITEM

A portable, affordable DC MIG Welding machine package, designed for fast setup and easy operation, and supplied complete with a directconnection MIG torch (approx 2.5m cable), clamp and accessories The MIG 130T features: • Fan-on-demand cooling and thermostatic protection • Portable and ideal for DIY, autobody and light-duty repair • Dimensions 61cm x 37cm x 45cm • Accommodate up to 5kg reels of solid or flux-cored MIG wire • Usable Welding Wire 0.6mm – 0.8mm (mild steel) • 4 Adjustment P.

MIG 200E MACHINE 230V 1PH  CLEARANCE ITEM

A professional, full-featured DC MIG Welding machine package, with Euro connection and 15kg wire feed assembly. Designed to be durable and easily operated, the MIG200E is supplied complete with a 3m Euro style MIG torch, earth clamp and accessories, and features: • Industrial cylinder support at the rear • Fan-on-demand cooling and thermostatic protection • Current Range 40 – 200 Amps • Input Voltage 230v (16A) • Rated Duty Cycle 200A @ 15% • Usable Welding Wire 0.6mm – 1.0mm (mild steel).

This single-stage one-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding. • Single chamber gas control • Fits cylinders with vertical outlet valves • One gauges display- Bottle contents and output pressure • Pressure controlled by the centre dial • Maximum outlet pressure 3.5 Bar • Maximum inlet pressure 20 Bar • Right hand thread • BS EN ISO.

MIG 400E PACKAGE 230/400V 3PH  CLEARANCE ITEM

The MIG400E has 18 adjustable positions over a current range from 50 – 400A and is rated 400A @ 25% duty cycle. The output current and wire feed speed are controlled using a simple to use potentiometer knob, whilst heat settings are easily adjusted using a multi-position voltage switch. Features: • Adjustable burn back • Spot weld timer • Euro connections • Accommodates up to 15kg wire reels fed by 4-roll wire feeding • Supplied with: • 3m Euro style MIG welding torch • Earth clamp • .

BND NOZZLE  CLEARANCE ITEM

Available in a range of sizes to suit the Bernard EZ-200A, EZ-300A and EZ-400A, these nozzles are offered in lower temperature Brass (B) and higher temperature Copper (C) versions .

TWC LINER  CLEARANCE ITEM

Please contact us for details about this product.

TWC CONTACT TIP  CLEARANCE ITEM

Please contact us for details about this product.

347 MIG WIRE  CLEARANCE ITEM

Please contact us for details about this product.

BZL CONTACT TIP  CLEARANCE ITEM

Please contact us for details about this product.

0.8MM GASLESS WIRE  CLEARANCE ITEM

E71-TGS is a carbon steel MIG wire that eliminates the need for shielding gas. Suited to welding thin gauge mild and galvanised steel.

308L MIG WIRE   CLEARANCE ITEM

Please contact us for details about this product.

309LSi MIG WIRE  CLEARANCE ITEM

Please contact us for details about this product.

1.0MM CONTACT TIP  CLEARANCE ITEM

Please contact us for details about this product.

316LSi MIG WIRE  CLEARANCE ITEM

Please contact us for details about this product.

CONE NUT REPAIR KIT  CLEARANCE ITEM

Please contact us for details about this product.

BZL MIG TORCH  CLEARANCE ITEM

Popular Bzl style replacement MIG torch, can be fitted with liners for mild steel, stainless, aluminium and copper wires. • Euro connector plug and comfortable handle design • Featuring sprung plug pins and spring cable supports • Includes blue 0.6-0.8mm mild steel liner • Durable and affordable.

4CE TIP ADAPTOR  CLEARANCE ITEM

Please contact us for details about this product.

4CE MIG TORCH  CLEARANCE ITEM

Please contact us for details about this product.

8MM CLEAR PVC HOSE  CLEARANCE ITEM

Please contact us for details about this product.

BIMAX 182 GAS/NO GAS  CLEARANCE ITEM

Please contact us for details about this product.

BND BODY TUBE ASSY  CLEARANCE ITEM

Please contact us for details about this product.

CERAMIC BACKING TILES  CLEARANCE ITEM

Our ceramic backing material strips enable welding to be carried out from one side with full penetration, and provide the following advantages: Removes the need for welding from the reverse side; Helps reduce oxidation; Does not create hydrogen inclusion; Quick execution improves operation economy; Can be used with every weldable metal; 60cm ceramic backing material VB 8063-A on self-adhesive aluminium tape. Round version. 7mm Diameter.

CERAMIC DIFFUSER  CLEARANCE ITEM

Please contact us for details about this product.

CO2 REGULATOR STEM  CLEARANCE ITEM

Regulator stems can become damaged over time from general wear and tear incurred when changing bottles. This damage can cause leaks at the cylinder connection, so bullnose stems and / or regulator nuts are often replaced.

BND CONDUCTOR TUBE  CLEARANCE ITEM

Please contact us for details about this product.

FRS CONICAL NOZZLE  CLEARANCE ITEM

Please contact us for details about this product.

CONICAL NOZZLE SCREW ON  CLEARANCE ITEM

Please contact us for details about this product.

1.2MM CONTACT TIP  CLEARANCE ITEM

Please contact us for details about this product.

CONTACT TIP ECU  CLEARANCE ITEM

Contact Tip for TWECO compatible torches. • Available in a variety of different sizes.

KMP CONTACT TIP  CLEARANCE ITEM

Contact tips for FRS (Fronius Compatible) Torches.

COPPER NOZZLE  CLEARANCE ITEM

Copper Nozzle for Bernard Compatible torch.

CYLINDRICAL NOZZLE  CLEARANCE ITEM

Please contact us for details about this product.

KMP DIFFUSER  CLEARANCE ITEM

Diffuser for Kemppi compatible torches.

4CE DIFFUSER  CLEARANCE ITEM

Please contact us for details about this product.

FEED ROLL SCREW   CLEARANCE ITEM

Please contact us for details about this product.

BND GAS DIFFUSER   CLEARANCE ITEM

Please contact us for details about this product.

GAS HOSE TELMIG   CLEARANCE ITEM

Please contact us for details about this product.

MIG HANDLE  CLEARANCE ITEM

Please contact us for details about this product.

BZL HANDLE SPRING   CLEARANCE ITEM

Please contact us for details about this product.

HD RETAINING HEAD  CLEARANCE ITEM

Please contact us for details about this product.

BND HEAD ASSY  CLEARANCE ITEM

The Head Assembly, often known as a Diffuser, performs several key functions at the ‘business end’ of a Bernard MIG Torch: Holding the contact tip, securing the nozzle and distributing the shielding gas. Available to fit the EZ-200A, EZ-300A and EZ-400A, the head assemblies are offered in 2 types: to fit the Long style contact tips and to fit the Short style contact tips.

BZL INSULATION SLEEVE  CLEARANCE ITEM

Please contact us for details about this product.

TWC INSULATOR  CLEARANCE ITEM

Please contact us for details about this product.

KMP INSULATOR  CLEARANCE ITEM

Insulator for Kemppi compatible torches.

BND INSULATOR HEX  CLEARANCE ITEM

Please contact us for details about this product.

BZL LINER  CLEARANCE ITEM

Please contact us for details about this product.

BND LINER  CLEARANCE ITEM

Torch liners are used to carry the wire up through the MIG torch from the reel to the contact tip & can become blocked by wire dust so should be changed accordingly. In 10ft & 15ft versions.

LOCKING NUT FOR   CLEARANCE ITEM

Replacement locking nut for spool hub assembly.

LONG BODY  CLEARANCE ITEM

Please contact us for details about this product.

MG NOZZLE  CLEARANCE ITEM

Please contact us for details about this product.

MICROSWITCH  CLEARANCE ITEM

Please contact us for details about this product.

MIG 160T MACHINE 230V 1ph  CLEARANCE ITEM

A portable, versatile DC MIG Welding machine package, designed for fast setup and easy operation. The MIG 160T features and supplied with: • Direct-connection MIG torch (approx 2.5m cable) • Clamp • The MIG 160T features • Fan-on-demand cooling • Thermostatic protection. • Current Range 40 – 160 Amps Input Voltage 230v (13A) • Rated Duty Cycle 160A @ 10% • Usable Welding Wire 0.6mm – 0.8mm (mild steel).