fume extraction | fume extraction accessories

Coupling sleeve for hose size 45mm. Hard version.

Main Filter - P R SL standard, for the Phantom Air PAPR Package.

Metal hood to fit over the end of a fume extraction arm, diameter 150mm. incl. throttle valve.

Pack of 10 Pre-Filters for the Phantom Air PAPR Package.

Set connection material for arm diam. 150 mm for mobile units. The set consists of the following parts: • 1 x Bearing ring diam: 150 mm • 2 piece plastic; for suction arm • 1 x screw set for plastic bearing ring • 8 x screws with hexagon socket M6x35 • 8 x washers M6 • 8 x M6 hex nuts • 8 x M6 spring washer • 1 x Grease tube 3 g for bearing ring.

Gross Filter (PK 10) for ProtectoXtract. 490x490mm. G4 class filter.

The ProtectoSpark is a retro-fittable filter tray that enables the ProtectoXtract to be used for grinding, applications. The protectoSpark filters out hot metallic particles prior to the entry to the 5 stage filter system.

MAIN FILTER FOR PROTECTOXTRACT. Particle filter F9.

ACTIVATED CARBON FILTER FOR PROTECTOXTRACT. 484 x 484 x 20 mm.

Precoat for filter cartridges, 100g (Bucket). For precoating of filter cartridges 10 g of precoat powder are required per m² filter surface.

Wall bracket with elbow and flange ring, clamp and screws. For fan/suction arm size 150MM.

Wall bracket with elbow and flange ring, clamp and screws. To fit 150mm suction arm.

Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket. Type "Easy-Clean-Plus", filter surface 25,3 m², dust category M.

Filter cartridge, filter area 10m². Size: 327 x 600 mm. • Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket • Filter surface 10 m², separation degree BIA M • Precoat is available separately which will lengthen the life of the cartridge.

Prefilter set M5, 268 x 268 x 20 mm,10 pieces.

PREFILTER MATS (10 PCS) 610x610x20mm. Can be used in units such as ProtectoXtract Wall and ProtectoXtract Twin.

Room monitoring system with WIFI. Records, depicts and acts on the current values of room temperature, humidity, particulate pollution and volume levels. Temp -10C to +60C, Humidity 10% to 95%, Fine dust 0 mg/m3 to 30mg/m3, (precision +/- 0.1mg/m3), Noise level 40 db to 140 db.

Activated carbon filling for 3.5kg incl.2 filter mats for LMD 507/508.

Aluminium Spark Arrestor Filter for use with the Weldability ProtectoXtract.

Bag filter G4 - 3 bags, dim.287x287x200. Suitable for the following filter units: LMD 508, Handyhepa.

Connecting kit for 160mm diameter fans to extraction arms including adapter, flange and hose clip.

This nozzle offers slightly wider shielding gas coverage on medium-thickness materials in butt and fillet applications, and outside-corner joints.

Rubber band for suction arm, colour - black. Approx 6cm wide.

Washable Aluminium Filter for use with our Weldability ProtectoXtract Mobile Fume Extractor to be used in welding applications to prevent burning of the fabric filters.

Activated carbon filter, 305 x 305 x 100 mm. Activated carbon filter in replaceable housing. incl. 3.5 kg activated carbon.

Activated carbon filter 610x610x100mm, housing 14 kg. Technical details -Steel plate housing- in black. Activated carbon fill - 14 kg. Pre-filter - F1, white. • The activated carbon filter consists of steel plate housing • It is powder-coated from the inside and outside • There are two special powder-coated pre-filter mats inside of it and a special activated carbon for absorption of gases and odours • Suitable with particle filter Prod.No. EXT100357.

Wooden frame space - dimension 610x610x86mm for activated carbon filter EXT97053. REF 200421130000149.

Sealing, foamed, outer dimension 610x610x6mm for activated carbon filter EXT97053. REF 200421190100106.

Activated carbon for LFE unit incl.2 filter mats for cassette.

Filter cartridge, easy clean plus, antistatic. 327 x 1.200 mm, filter area: 25,2m².

Clamp ring 2mm, 2 parts for suction arm 150mm, including rubber ring.

Display for Airfilter Control incl. membrane keyboard.

Usable for devices of the type: Protectocube/ZPF. • Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket • Filter surface 20 m², separation degree BIA M • Weight [kg]: 15 • Height [mm]: 1.200 Diameter [mm] • 327 Filter surface [m²]: 20.

Usable for devices of the type: Protectocube 4N-500 MV • Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket • Filter surface 5 m², separation degree BIA M • Height [mm]: 300 • Depth [mm]: 276 • Width [mm]: 375 • Diameter [mm]:327.

EASY CLEAN FILTER CARTRIDGE. LENGTH 600MM. FILTER SURFACE 12.5M2. • Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket. • Type Easy Clean, filter surface 12.5 m², dust category M.

Cone from plastic for filter cartridge. Length: 600 mm.

Cartridge protection sleeves. This option is for short and long cartridges which can be cut to size on site.

Brake-Disk for suction arm (middle-joint), (2 pieces, diam. 100mm).

Friction disc for a suction arm, third joint, set of 2 pieces, diameter 55mm.

Friction disc for a suction arm, 1 internal joint, set of 2 pieces, diameter 80mm.

Funnel Nozzle 45mm with magnetic base for ProtectoTwin Portable Fume Extractor.

High particulate filter H13, 305x305x150 (+2*6), separation degree of 99,997 percent, Filter area 2,3 m², Filter class H13 • Usable for devices of the type: LMD 507/508.

HEPA filter of the filter class H13 in a stable wooden frame.Particle Filter H13 610x610x186mm (when used with activated charcoal cartridge).

LMD508 Filter unit 230v 1.2kw Motor 320m3/hr.

On-torch MIG extraction kit, 24.5mm diameter for use with the ProtectoVac Fume Extractor for on-MIG-torch extraction.

On-torch MIG extraction kit, 27.5mm diameter for use with the ProtectoVac Fume Extractor for on-MIG-torch extraction.

Usable for devices of the type: Filtercase LBK, LMD 518, LMD 519 and ZING. HEPA filter of the filter class H13.

PREFILTER FF-F1 MATS (10 PCS) 610x610x20mm. For use in the activated carbon cassettes.

Size: 280 x 280 x 20 mm. 10 pieces per set. Filter class M5.

Particle Filter H13 250x250x100MM for ProtectoCart.

HANDYCART REPLACEMENT FILTER. Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket. With PTFE membrane, filter surface 0.8 m².

Our Environmental Detection Instrument (EDI) is now portable! With his very own stand, trialling EDI requires no installation and you are free to move him around your site to test fume, noise, temperature and humidity in different places.

PROTECTOTWIN FILTER. Cylindric filter cartridge for horizontal and vertical assembly with integrated inner support basket. With PTFE membrane, filter surface 1.2 m², dust category M.

The ProtectoXtracTop is a retro-fit-able filter unit that enables the ProtectoXtract to be used for grinding applications. Extraction of particles takes place through a perforated plate within the supporting surface. ATTENTION; This unit must only be used in combination with the ProtectoSpark (EXT978013). Working surface W x D = approx.. 1100 x 700 mm External dimensions: W x D = 1150 x 750 mm.

Replacement 2.5M hose for the ProtectoVac Fume Extractor.

Particle filter H13. Size: 305 x 305 x 200 mm.

Replacement Fine Filter for the ProtectoVac Fume Extractor.

Replacement HEPA Filter for the ProtectoVac Fume Extractor.

Slit Nozzle 45mm with magnetic base for ProtectoTwin Portable Fume Extractor.

Spare hose for flexible suction arm, 2m long. Also used for telescopic arm, diameter 150mm.

Spare hose for flexible suction arm, 3m long.

Spare hose for flexible suction arm, 4m long.

Fume extraction system wall bracket. Compatible with Fan 2 000 m³/h, 0,75 kW, Fan 2 500 m³/h, 1,1 kW, Fan 3 000 m³/h, 1,5 kW.

Replacement antenna suitable for an EDI unit.