clearance | carbon-arc gouging

FLAIR 2 HINGE PIN  CLEARANCE ITEM

The Hinge Pin is a replacement part for the Flair 2 torch. You can identify where this part is used by cross reference to the parts manual below. The flair 2 type gouging torch is a 600 amp carbon-arc torch ideal for use in fabrication and boiler shops shipyards maintenance shops and foundries for applications up to 600amps. It will accept round type arc welding carbons from 4mm to 10mm diameter.

FLAIR 2 SAFETY RING  CLEARANCE ITEM

The Safety Ring is a replacement part for the Flair 2 torch. You can identify where this part is used by cross reference to the parts manual below. The flair 2 type gouging torch is a 600 amp carbon-arc torch ideal for use in fabrication and boiler shops shipyards maintenance shops and foundries for applications up to 600amps. It will accept round type arc welding carbons from 4mm to 10mm diameter.

FLAIR 2 SCREW   CLEARANCE ITEM

The Screw is a replacement part for the Flair 2 torch. You can identify where this part is used by cross reference to the parts manual below. The flair 2 type gouging torch is a 600 amp carbon-arc torch ideal for use in fabrication and boiler shops shipyards maintenance shops and foundries for applications up to 600amps. It will accept round type arc welding carbons from 4mm to 10mm diameter. .

K3/K4 BOOT  CLEARANCE ITEM

The Boot is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons.

K3/K4 CONNECTOR   CLEARANCE ITEM

The connector is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons. .

K3/K4 COUPLING   CLEARANCE ITEM

The Coupling is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons. .

K3/K4 FLAT WASHER  CLEARANCE ITEM

The Flat Washer is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons. .

K3/K4 MALE CONNECTOR  CLEARANCE ITEM

The Male Connector is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons.

K3/K4 O RING   CLEARANCE ITEM

This O Ring is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons .

K3/K4 RETAINER   CLEARANCE ITEM

The Retainer Screw is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons .

K3/K4 SPRING WASHER  CLEARANCE ITEM

The Spring Washer is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons.

K3/K5 SCREW  CLEARANCE ITEM

The Screw for Body is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons.

K4000 SCREW   CLEARANCE ITEM

The Screw is a replacement part for the K4000 torch. You can identify where this part is used by cross reference to the parts manual below. The K4000 type gouging torch is a heavy-duty 1000amp carbon-arc gouging torch with a built-in 15o angled head and 360o 7ft swivel cable assembly. The torch is ideal for high-amp metal removal applications such as ship building and pressure-vessel manufacturing. It will accept a wide range of gauging carbons flat and rounded from 3.9mm to 15.7mm diameter.

K4000 SPRING   CLEARANCE ITEM

The Spring is a replacement part for the K4000 torch. You can identify where this part is used by cross reference to the parts manual below. The K4000 type gouging torch is a heavy-duty 1000amp carbon-arc gouging torch with a built-in 15o angled head and 360o 7ft swivel cable assembly. The torch is ideal for high-amp metal removal applications such as ship building and pressure-vessel manufacturing. It will accept a wide range of gauging carbons flat and rounded from 3.9mm to 15.7mm diameter.

K4000 WRENCH   CLEARANCE ITEM

The Wrench is a replacement part for the K4000 torch. You can identify where this part is used by cross reference to the parts manual below. The K4000 type gouging torch is a heavy-duty 1000amp carbon-arc gouging torch with a built-in 15o angled head and 360o 7ft swivel cable assembly. The torch is ideal for high-amp metal removal applications such as ship building and pressure-vessel manufacturing. It will accept a wide range of gauging carbons flat and rounded from 3.9mm to 15.7mm diameter.

K5 SLEEVE   CLEARANCE ITEM

The sleeve is a replacement part for the K3/K5 torch. You can identify where this part is used by cross reference to the parts manual below. Our most popular and widely sold design torches. The K3 is a general-purpose 600amp carbon arc torch for use with 3.2 to 9.5mm gouging carbons. The K5 is a 1200amp torch for use with 4.0mm to 15.9mm carbons.

SPRING CAP   CLEARANCE ITEM

The Spring Cap is a replacement part for the Flair 2 torch. You can identify where this part is used by cross reference to the parts manual below. The flair 2 type gouging torch is a 600 amp carbon-arc torch ideal for use in fabrication and boiler shops shipyards maintenance shops and foundries for applications up to 600amps. It will accept round type arc welding carbons from 4mm to 10mm diameter.