19/08/2017    www.weldability-sif.com    Weldability | Sif    sales@weldability-sif.com    0845 130 7757

Categories

Product Categories sif products fume extraction oxy/fuel mig welding stick welding tig welding spot welding plasma cutting tools and marking pipe tools abrasives handling equipment drying ovens chemicals welding safety industrial safety

View Product


NM TYPE 60/90 CUTTER


NM TYPE 60/90 CUTTER.
This product connects to oxygen and acetylene (or propane) hoses via 3/8 BSP fittings and uses these gases to cut metal with the aid of an appropriate nozzle.
The mix of the oxygen and fuel gas is controlled via the two control knobs located at the inlets. Three gas channels lead from the mixing area (in the handle) to the head of the cutter.
One channel carries the fuel gas, one carries the heating oxygen supply and the last carries the cutting oxygen supply.
Cutting oxygen is released in bursts when required by the user. This is achieved by using the cutting oxygen control lever, located on the handle.
When not in use, this lever can be secured in place by way of a small fastener on the handle. .

Click the thumbnail(s) below for a closer look:
  photo  

Part Num:BU600BWeight:2.325 kg
Category:OXY/FUEL WELD / CUTVoltage:n/a
View More:cutting torchesUnit:EACH
pdf iconProduct/Sales InformationMin Quantity:1
pdf iconLogin to Download MSDSLength:60
Head Angle:90

In Stock For Immediate Despatch  
trolley    
print Print


Note: Clicking Shop Now will transfer you to the nearest Online Store, operated by a Weldability Sif Partner servicing your location. If you are based outside of the UK, you may be exempt from paying VAT.



photo

photo  
Back to Top


You may also be interested in the following products:

NM TYPE 36/90 CUTTER  .NM TYPE 36/90 CUTTER
A popular design of oxy/ fuel gas cutting torch which is used with NM type nozzles. It features 3/8 BSP inlets, pressure control knobs and cutting oxygen lever.
Part ID: BU300BView More: cutting torches
 
NM TYPE 48/90 CUTTER.NM TYPE 48/90 CUTTER
A popular design of oxy/ fuel gas cutting torch which is used with NM type nozzles. It features 3/8 BSP inlets, pressure control knobs and cutting oxygen lever.
Part ID: BU400BView More: cutting torches
 
NM TYPE 60/90 CUTTER.NM TYPE 60/90 CUTTER
This product connects to oxygen and acetylene (or propane) hoses via 3/8 BSP fittings and uses these gases to cut metal with the aid of an appropriate nozzle. The mix of the oxyg..
Part ID: BU600BView More: cutting torches
 
Back to Top



Links

Links Extractability SifWeld Learn To Weld Weldability Sif Foundation