24/11/2017    www.weldability-sif.com    Weldability | Sif    sales@weldability-sif.com    0845 130 7757

Categories

Product Categories sif products fume extraction oxy/fuel mig welding stick welding tig welding spot welding plasma cutting tools and marking pipe tools abrasives handling equipment drying ovens chemicals welding safety industrial safety

View Product


GAS BOTTLE ADAPTOR CO2 TO AR


GAS BOTTLE ADAPTOR CO2 TO AR.The CO2 To Argon Adaptor is used to connect a CO2 regulator to an argon cylinder outlet. The double-threaded brass adaptor has a CO2 bottle fitting at the top, which connects to the nut on the regulator inlet, and a fitting at the bottom, which screws in to an argon bottle.

Click the thumbnail(s) below for a closer look:
  photo  photo  

Part Num:AECO2BNWeight:0.145 kg
Category:MIG WeldingVoltage:n/a
View More:cylinder adaptorsUnit:EACH
pdf iconLogin to Download MSDSMin Quantity:1
pdf iconn/a

In Stock For Immediate Despatch  
trolley    
print Print


Note: Clicking Shop Now will transfer you to the nearest Online Store, operated by a Weldability Sif Partner servicing your location. If you are based outside of the UK, you may be exempt from paying VAT.



photo

photo  photo  
Back to Top


You may also be interested in the following products:

2S 2G CO2 REG 10BAR.2S 2G CO2 REG 10BAR
This two-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argo..
Part ID: AE7008LXView More: regulators - lx
 
ARGON ECONOMISER + FLOW TUBE.ARGON ECONOMISER + FLOW TUBE
Reduces unnecessary loss of shielding gas by up to 50%. Shipped calibrated at 8Ltr/min but can be adjusted via an allen key fitting in the base. Includes a flowmeter.
Part ID: MW15210View More: gas economisers
 
FLOWMETER 0-15 LPM.FLOWMETER 0-15 LPM
Designed to be fitted to the outlet of an argon or CO2 regulator to provide greater control of the flow of your shielding gas through the gas line. Ideal for use in MIG and TIG. F..
Part ID: AU200View More: flowmeters
 
FLOWMETER 0-40 LPM .FLOWMETER 0-40 LPM
Designed to be fitted to the outlet of an argon or CO2 regulator to provide greater control of the flow of your shielding gas through the gas line. Ideal for use in MIG and TIG. F..
Part ID: AU300View More: flowmeters
 
Back to Top



Links

Links Extractability SifWeld Learn To Weld Weldability Sif Foundation