19/09/2017    www.weldability-sif.com    Weldability | Sif    sales@weldability-sif.com    0845 130 7757

Categories

Product Categories sif products fume extraction oxy/fuel mig welding stick welding tig welding spot welding plasma cutting tools and marking pipe tools abrasives handling equipment drying ovens chemicals welding safety industrial safety

View Product


1S 2G ACET REG


1S 2G ACET REG.This single-stage two-gauge regulator is designed to step the pressurised contents of a compressed gas cylinder down to a pressure that can be used in Oxy/Acetylene Cutting/Welding or Argon/CO2 Shielded MIG / TIG welding.
2 Gauges
Displays - Bottle contents & Output pressure
Output pressure controlled by the centre dial
Fits vertical outlets valves
Maximum outlet pressure 1.5 BAR .

Click the thumbnail(s) below for a closer look:
  photo  

Part Num:AE3002LXWeight:1 kg
Category:OXY/FUEL WELD / CUTVoltage:n/a
View More:regulators - lxUnit:EACH
pdf iconProduct/Sales InformationMin Quantity:1
pdf iconLogin to Download MSDSOutlet Pressure:1.5 BAR
Cylinder Fittings :5/8 in BSP LH

In Stock For Immediate Despatch  
trolley    
print Print


Note: Clicking Shop Now will transfer you to the nearest Online Store, operated by a Weldability Sif Partner servicing your location. If you are based outside of the UK, you may be exempt from paying VAT.



photo

photo  
Back to Top


You may also be interested in the following products:

5/8BSP LH CYLINDER NUT.5/8BSP LH CYLINDER NUT
Regulator nuts can become damaged over time from general wear and tear incurred when changing bottles. This damage can cause leaks at the bullnose, so regulator nuts and / or bullnose s..
Part ID: DANUTLHLXView More: regulator parts
 
90 DEG ADAPTOR LH.90 DEG ADAPTOR LH
Some cylinder manufacturers now produce bottles which require the regulator to be connected to the bottle from the side. The 90 adaptors allow this to happen by keeping the regulator t..
Part ID: DA90LHView More: cylinder adaptors
 
DGN BARREL FUEL GAS FBA INLINE.DGN BARREL FUEL GAS FBA INLINE
Non-resettable FBAs for high flow oxy/fuel gas cutting & welding. Will withstand a series of minor flashbacks but will not react as a consequence of external heat. Can be connected in p..
Part ID: AU111007View More: flashback arrestors
 
Back to Top



Links

Links Extractability SifWeld Learn To Weld Weldability Sif Foundation